BLXXD - AQUATAPOXY GEL PART B, 35-222

  • MSDS: BLXXD
  • Manufacturer: AMERICAN CHEMICAL CORP
  • Product Name: AQUATAPOXY GEL PART B, 35-222
  • National Stock Number: 8040-00N021600
Product Identification

Product ID:AQUATAPOXY GEL PART B, 35-222
MSDS Date:10/02/1990
FSC:8040
NIIN:00N021600
Kit Part:Y
MSDS Number: BLXXD

Responsible Party
AMERICAN CHEMICAL CORP
5231 NORTHRUP AVE
ST LOUIS, MO 63110
US

Emergency Phone: 314-664-2403

Info Phone: 314-664-2403

Cage: 5T256

Contractor
AMERICAN CHEMICAL CORP
HAYWARD, CA 94544 US

Telephone: 415-475-0888

Cage: 5T256

Ingredients

SILICON DIOXIDE, AMORPHOUS; (SILICA)

CAS: 7631-86-9

Fraction By Weight: 35-40%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3 TDUST


KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


MODIFIED ALIPHATIC POLYAMINE


PALYGORSKITE; (MAGNESIUM ALUMINUM SILICATE).

CAS: 12174-11-7

RTECS: RT6400000

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CAUSES IRRITATION AND MAY CAUSE
BURNS. SKIN:PREVENT ALL SKIN CONTACT. MAY CAUSE INJURY FOLLOWING
PROLONGED OR REPEATED CONTACT. THIS PHONOL DERIVATIVE COMPONENT OF
THIS COMPOUND IS A SPI CLASS 5 I RRITANT. REPEATED EXPOSURE MAY
CAUSE SENSITIZATION OF INDIVIDUAL. INGEST:PHYSICAL PROPERTIES
SUGGEST (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:THAT THIS ROUTE OF EXPOS TO BE
EXTREMELY UNLIKELY. ORAL TOX NOT AVAILABLE ON COMPOUND. GET MD
IMMED. INHAL:EXCESSIVE INHALAITON LIKELY TO CAUSE IRRITATION OF
MUCOUS MEMBRANES. SYSTEMIC & OTHE R EFTS:PROD CAN BE ALKALINE,
CORROSIVE,& IRRIT TO SKIN, EYES, & MUC MEMB. MAY CAUSE INJURY UPON
PRLNGD/RPTD CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES. CALL MD. SKIN:WASH IMMEDIATELY WITH SOAP & WATER.
IF IRRITATION OR SENSITIZATION OCCURS, REMOVE INDIVIDUAL FROM
FURTHER CO NTACT WITH MATERIAL. INHAL:REMOVE TO FRESH AIR IF
EFFECTS OCCUR. CALL MD. INGEST:GET MD IMMEDIATELY.

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, CO2 OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA/FULL PROT
EQUIP.H2O MAY BE HELPFUL IN KEEPING ADJACENT CNTNRS COOL.AVOID
SPREADING BURNING LIQ W/H2O USED FOR COOLING PURP.
Unusual Fire/Explosion Hazard:MAY FORM TOXIC MATERIALS, CARBON
MONIXIDE, AND NITROGEN COMPOUNDS.

Accidental Release

Spill Release Procedures:KEEP SOURCES IF IGNITION AND HOT METAL
SURFACES ISOLATED FROM THE SPILL. MATERIAL MAY FLOW SLOWLY. SCRAPE
INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT HANDLE OR STORE NEAR FLAME,
HEAT OR STRONG OXIDANTS. DO NOT STORE IN DIRECT SUNLIGHT. STORE IN
COOL, DRY AREA. AVOID PRLNGD STORAGE ABOVE 100F.
Other Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN USE. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN.

Exposure Controls

Respiratory Protection:TO AVOID OVEREXPOSURE, WEAR AN APPROVED
NIOSH/MSHA AIR-PURIFYING RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENT SHOULD BE SUFFICIENT FOR MOST
CONDITIONS. LOCAL EXHAUST VENTILATION MAY BE NEC FOR SOME OPERS.
Protective Gloves:NEOPRENE OR CHEMICALLY REISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLOTHING.EMERG EYE WASH IN IMMED. AREA OF USE .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.23
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MASTIC CONSISTENCY
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED EPOXY RESINS, AND STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMOPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE, CARBON DIOXIDE, AND NITROGEN
COMPOUNDS.

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO ALL LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.